Programming
106 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
To activate the flap:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Information
If flap scan has been set, the display will switch from the seam program to
the start screen.
The display shows the flap, and the flap scan and corner knife correction
can be set via the quick access menu.
Fig. 88: Activating the flap (2)
(1) - Quick access corner knife correction
(2) - Quick access flap correction
(3) - Display of flap
To Next Page
Loading...
