Programming
104 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
To set the seam securement of the left needle:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
The user interface for setting the desired item is displayed.
Information
If the seam pattern is straight, you only have to set the left seam
securement.
Symbols Meaning
Select stitch condensing
• Set stitch length for stitch condensing at seam end
(0.5 - 3.5 mm)
• Set number of stitches for stitch condensing at seam end
(0 - 10)
Select single tack
• Set stitch length for single tack at seam end
(0.5 - 3.5 mm)
• Set number of stitches for single tack at seam end
(0 - 10)
Select double tack
• Set stitch length for double tack at seam end
(0.5 - 3.5 mm)
• Set number of stitches for double tack at seam end
(0 - 10)
To Next Page
Loading...
