Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 61
Selecting the closing order of the flap clamps
Shaped guide for flap
Fig. 53: Shaped guide for flap
The flap clamp (2) delivers the unmachined part (1). It has to be machined
as a shaped guide that corresponds to the flap used.
When sewing in flaps, the seam beginning and seam end are recognized
by the light barrier.
Area of application Mounting plate Closing order of the flap clamps
Production of trousers Right Flap clamp on the right closes first
Production of jackets Left Flap clamp on the left closes first
(1) - Unmachined part (2) - Flap clamp
To Next Page
Loading...
