Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 167
Touch calibration
The display switches to Touch calibration.
Fig. 138: Touch calibration
To carry out the touch calibration:
1. Successively press on the places indicated by the green arrow.
Touch calibration is carried out.
The display returns to Adjust and test control panel.
OR:
1. Press Cancel.
Touch calibration is canceled.
The display returns to Adjust and test control panel.
Information
Another option is to perform the touch calibration using the boot loader.
To do so, press on the control panel while the control panel boots up.
To Next Page
Loading...
