Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 121
Transport clamp
The display switches to Transport clamp.
Fig. 102: Transport clamp
Press a button to either open another submenu or enter the desired values
directly using the numeric keypad.
To set the transport clamp:
1. Press the desired button.
The user interface for setting the desired item is displayed.
Symbols Meaning
Set return speed
• 10% - 100%
Set insertion speed
• 10% - 100%
Set return of transport clamp
• Without transport
• Transport up to stacking position
• Transport up to loading position
Set waiting position of transport clamp
To Next Page
Loading...
