DURKOPP ADLER 745-35-10 A - Transport Clamp Return Settings

Programming
120 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Automatic tape feeder (745-35-10 A only)
 The display switches to Automatic tape feeder.
Fig. 101: Automatic tape feeder
Symbols Meaning
Automatic tape feeder On/Off
Set length of tape at seam begin.
• 0 - 99 mm
Set length of tape at seam end
• 0 - 99 mm
Adjust clamp speed with belt transport
• 10 - 100 %