DURKOPP ADLER 745-35-10 A - Transport Clamp Adjustment

Programming
146 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Global parameters
Important
The Global parameters menu is protected with a password. You use
this menu to adjust basic machine parameters. The password is 25483.
Information
If an option is not available or grayed out, it must be set up in the Machine
configuration menu item ( p. 137). Otherwise, the option will be
unavailable in this class.
 The display switches to Global parameters.
Fig. 121: Global parameters
Symbol Description
Set positioning point seam begin./center/end
• Set positioning point seam begin. (100 mm - 300 mm)
• Set positioning point seam center (100 mm - 300 mm)
• Set positioning point seam end (100 mm - 300 mm)
Adjust transport clamp  p. 148
Adjust corner knife
• Set cutting duration (0 ms - 1000 ms)