DURKOPP ADLER 745-35-10 A - Changing Seam Sequence Templates

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 85
Assigning an available pocket program slot
Fig. 68: Assigning an available pocket program slot (1)
To create a seam sequence:
1. Use Drag and Drop to drag any pocket programs you do not need from
the sequence to be created (10) to the trash OR tap on the trash
to delete all pocket programs.
 The pocket programs are deleted from the sequence.
2. Press the button (1).
 The display switches to Select program.
(1) - Available pocket program slot
①