DURKOPP ADLER 745-35-10 A - Creating or Modifying Seam Sequences

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 79
Entering values using the numeric keypad
Fig. 63: Entering values using the numeric keypad
To enter values using the numeric keypad:
1. Enter the desired value.
2. Confirm with OK.
To enter a negative value on the numeric keypad:
1. Enter the desired value.
2. Press the +/- button.
 The value is given a - sign and becomes negative.
3. Confirm with OK.
(1) - Value range
(2) - Preset value
(3) - Unit
①②③