DURKOPP ADLER 745-35-10 A - Step Motor Function Testing

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 161
Test step by step
 The display switches to Test step by step.
Fig. 133: Test step by step
To carry out a step-by-step test:
1. Press the Test step by step
button.
2. Press the pedal after every single work step.
 The step by step test allows you to test the machine workflow.
3. To exit the test: access the menu again and press the OFF button.