Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 95
Program parameters
Information
If an option is not available or grayed out, it must be set up in the Machine
configuration menu item ( p. 137). Otherwise, the option will be
unavailable in this class.
To configure pocket programs:
1. Press the Program parameters button.
The display switches to Configure pocket programs.
Fig. 81: Program parameters
Symbols Meaning
Select pocket program p. 97
Enter name of pocket program p. 98
Copy pocket program p. 98
Create seam program p. 100
Correction light barrier p. 107
To Next Page
Loading...
