Symbol function
C
automatic rotation speed active
D
light barrier switched on
E
machine running
F
limited rotation speed active
8.3 Operating the V810 control unit
Functions can be switched on and off by pressing the number keys and certain and
symbol keys on the control panel.
key 3: auto foot lift
auto foot lift on stop in mid-seam on: right arrow over key 3 on.
auto foot lift on stop in mid-seam off: right arrow off.
auto foot lift after thread cut-off on: left arrow over key 3 on.
auto foot lift after thread cut-off off: left arrow off.
key 4: basic needle position
basic needle position UT: left arrow over key 4 on.
basic needle position OT: left arrow off.
22
To Next Page
Loading...
Need help?
General
