EasyManua.ls Logo

DVDO iScan HD+ - Safety Information; Safeguards; Precautions

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safeguards
To reduce the risk of electric shock, do not expose this
appliance to rain or moisture.
If the wall plug does not fit into your local power socket,
then ask your electrician to replace your obsolete outlet.
Do not modify the wall plug. To do so will void the warranty
and safety feature.
Precautions
Warning: the FCC Regulations state that any unautho-
rized changes or modifications to this equipment not
expressly approved by the manufacturer could void the
user’s authority to operate this equipment.
Only operate your iScan HD+ using the included external
power supply. Use of other power supplies could impair
performance, damage your iScan, or cause fires.
Protect and route power cords so they will not be stepped
on or pinched by anything placed on or against them.
Be especially careful at plug-ins, or cord exit points from
the iScan HD
+.
Avoid excessive humidity, sudden temperature changes
or temperature extremes.
Keep your iScan HD+ away from wet locations such
as bathtubs, sinks, laundries, wet basements and
swimming pools.
Use only accessories recommended by the manufacturer
to avoid fire, shock or other hazards.
Unplug your iScan HD+ before cleaning. Use a damp cloth
for cleaning. Do not use cleaning fluids or aerosols, which
could enter the unit and cause damage, fire or electrical
shock. These substances may also mar the finish of your
iScan HD
+.
Never open or remove unit panels or make any adjustments
not described in this manual. Attempting to do so could
expose you to dangerous electrical shock or other hazards.
It may also cause damage to your iScan HD
+.
Do not attempt to service this unit. Instead, disconnect
it and contact your Authorized DVDO Reseller or contact
Anchor Bay Technologies directly.
Compliance Certification
This product complies to the following domestic
and international regulations and standards.
Electromagnetic Compatibility
EMC Directive 89/336/EEC, EN 55022:1998,
EN 61000-3-2, EN 61000-3-3, CISPR 22, CFR 47
Part 15 Subpart B, EN 55024, EN 61000-4-2,
EN 61000-4-3:2002, EN 61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-11, CISPR 24
Safety
IEC 60950-1 (2001)
19
SAFETY INFORMATION