Thank you for purchasing the iScan HD+ High Resolution Video
Scaling Engine, featuring video-processing technology as created
by the Anchor Bay Technologies team. This product delivers a
level of video quality among the very highest available today.
We are especially pleased to bring you ABT’s new High Definition
Precision Video Scaling™ technology. This technology enables
precision upconversion of Standard and High Definition (480i,
480p, 576i, 576p, 720p or 1080i)) video sources and content to
the native or optimum resolution of your display, delivering
best-in-class front-of-screen performance. Available output reso-
lutions span from 480p all the way to 1080p, including the
standard HDTV resolutions of 720p and 1080i. In addition to our
own video scaling technology, new to the DVDO product line, the
iScan HD also offers a host of other innovative features.
Among these are:
䊳
flexible Digital Audio switching
䊳
precision audio/video time-delay synchronization
䊳
improved timebase correction
䊳
fully programmable framerate conversion
䊳
input and output aspect ratio controls
䊳
flexible zoom and pan controls
䊳
SDI input capability
(with the DVDO SDI Video Input Module)
The
Technical Specifications section at the end of this
Product Guide summarizes the key features and performance
of the iScan HD
+.
This Product Guide will help you set up your new iScan HD
+,
and will also give you information on how to match it to your
display, as well as how to connect it to and use it with the
rest of the components in your system.
Should you have any questions during the setup or operation
of this DVDO product, you should first contact your Authorized
DVDO Reseller for assistance. You can also contact Anchor Bay
Technologies directly for assistance:
Toll-Free (in the USA) 1.866.423.DVDO
Email Help@DVDO.com
Website www.DVDO.com
The carton of your iScan HD
+ should contain the following:
䊳
iScan HD+ High Resolution Video Scaling Engine
䊳
Universal 6V@5A AC to DC power converter
䊳
US power cord (international customers - please
consult your local Authorized DVDO Reseller)
䊳
Remote control
䊳
iScan HD+ Product Guide
The iScan HD
+ uses a 15-pin HD15 VGA-type connector and a
DVI connector to provide video output signals. You will need to
purchase an output cable to connect one of these outputs to
your projector, HD-compatible TV, Plasma display panel, or
other display device. Different displays have different input
connectors, so please check your display specifications to ensure
compatibility. Even though the HD15 connector is commonly
used on personal computers for RGB video, the iScan HD
+ is
capable of outputting either RGB or YPbPr (Component) video
formats from this connector. This is explained in detail in the
Output Setup section of this Product Guide.
Both input and output cables can be supplied by your
Authorized DVDO Reseller. To find your nearest Authorized DVDO
Reseller, go to
www.dvdo.com/res/index.html
You can also find a wide selection of cables on our website at
www.dvdo.com/pro/pro_acc.html
2
To Next Page
Loading...