Operation manual - Spider ILD01
44 / 52 rev.
10-01-05-2011
11.16 CHANGING THE WHEEL
Change the wheels on a level, firm surface
Turn the wheel so that the tightening nuts are
accessible from the outside
Stop the engine, remove the key from the ignition
Secure the machine against movement.
Lift the mower and support it under the cutter deck
Ensure the machine safe & supported before
working on it.
Loosen the wheel nuts, remove the wheel
After repairing it, attach the wheel back in the
reversed order.
Use suitable tools to unscrew the nuts
.
11.17 TYRE PRESSURE
Keep the specified tyre pressure. Other values may
unfavourably influence the riding characteristics
especially on slopes. You may even loose control of
the machine.
(max. tire pressure - 250 kPa / 2,5 bar / 36 PSI)
11.18 MOWING HEIGHT ADJUSTMENT MECHANISM
Keep the moving parts of the slide way clean,
undamaged and without an excessive clearance
To Next Page
Loading...