38
For Microsoft Windows98SE/Me users, please connect the larger USB plug to the PC USB port
and the other end to the digital video camera USB port after installing the drivers and application
software. When the camera enters the “connection to PC” page, press the up button ▲ or down
button ▼ to select webcam and then press the confirm buttom
.
Then follow the below procedures:
● Step one: Right click on “My Computer”.
● Step two: Then select “Device manager”.
● Step three: Select “GENERIC IDE DISK TYPE47” and then choose “Properties” to show
the below screenshot:
● Step four: Please select “DMA” and then press OK.
Note: When playing back video files on the PC, make sure the PC has DirectX8.0 or
newer versions and is supported.
To Next Page
Loading...
Need help?
General
