Dymo LabelManager Wireless PnP - DYMO Label Software Installation and Use; Installing Software and Adding Printer

16
LabelManager
®
Wireless PnP
User Guide
Downloading and Installing DYMO Label Software
To use your label maker over a wireless network connection, you must install
DYMO Label software version 8.5 or later on each computer that needs wireless
access to the label maker.
To install the software on a Windows
®
system
1 Download the DYMO Label software version 8.5 or later from the Support
section of the DYMO Web site at www.dymo.com.
2 Close all open Microsoft Office applications.
3 Double-click the Installer icon.
After a few seconds, the installation screen appears.
4 Click Install and follow the instructions in the installer.
When the software installation is complete, you are prompted to connect your
printer.
5 Without connecting your printer, click Finish.
6 Double-click on your desktop to start DYMO Label software and add
your wireless network printer. See Adding the Label Maker as a Wireless
Printer.
To install the software on a Mac OS
®
system
1 Download DYMO Label software version 8.5 or later from the Support section
of the DYMO Web site at www.dymo.com.
2 Double-click the Installer icon and follow the on-screen instructions.
When the software installation is complete, you are prompted to connect your
printer.
3 Without connecting your printer, click Finish.
4 Double-click on your desktop to start DYMO Label software and add
your wireless network printer. See Adding the Label Maker as a Wireless
Printer.