Caution!
Blocking/closing the power amp's ventilation louvers is not permissible. Without sufficient
cooling/ventilation, the power amplifier may automatically enter protect mode.
Keep ventilation louvers free from dust to ensure unhindered airflow.
Notice!
Do not use the power amplifier near heat sources, like heater blowers, stoves, or any other
heat radiating devices.
Notice!
Do not use
Dynacord power amplifiers in an environment where temperatures are below 0°C
or exceed +40°C.
For fixed amplifier installations in a device control room that incorporate a central air-cooling
system or air conditioners, calculating the maximum heat emission may be necessary.
See also
– Mains operation & resulting temperature, page 35
16 en | Installation
L Series and C Series FIR-Drive Power
Amplifiers
2017.10 | 02 | F.01U.327.801 Installation manual Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
Need help?
General
