Technical data
Amplifier model L1300FD/C1300FDi
Load Impedance 2 Ω 2.6 Ω 4 Ω 8 Ω
Maximum Output Power, Single Channel 1100 W 950 W 660 W 350 W
Maximum Output Power, Dual Channel 1000 W 850 W 600 W 320 W
Maximum Output Power, Bridged - - 2000 W 1200 W
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
55.3 V
Voltage Gain
Ref.1 kHz
32.0 dB
THD at 450 W/4
Ω
MBW = 80 kHz, 1 kHz
< 0.05%
IMD-SMPTE,
60 Hz, 7 kHz
< 0.1%
DIM30,
3.15 kHz, 15 kHz
< 0.05%
Maximum Input Level +21 dBu
Crosstalk
ref. 1 kHz, at 100 W/4
Ω
< -80 dB
Frequency Response
,
ref. 1 kHz
10 Hz to 21 kHz (±1 dB)
Input Impedance,
Active Balanced
20 k Ω
Signal to Noise Ratio Amplifier,
A-weighted, ref to Max. Output Power @ 8
Ω
>104 dB
Output Noise
,
A-weighted
< -68 dBu
Output Stage Topology Class AB
Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
1/8 Maximum Output Power @ 4
Ω
550 W
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current
limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5°C to +40°C (40°F to +105°F)
Safety Class I
8
L Series and C Series FIR-Drive Power
Amplifiers
Technical data | en 29
Bosch Sicherheitssysteme GmbH Installation manual 2017.10 | 02 | F.01U.327.801
To Next Page
Loading...
Need help?
General
