Paging Console
14 Owner‘s Manual
The second line of the LC-display indicates the description of the programs, as they were definied
during configuration via IRIS-Net.
3. Pressing a single or several selection buttons assigns the outputted program (background music) to
the selected areas and groups. If the yellow LED of a selection key lights, the program can not be
assigned to this area or group.
4. In order to leave the program-assign mode press the ESC button several times till the operation mode
of the paging console is reached.
It is also automatically canceled after approximately 15 seconds.
Special Functions
Generally, assigning a function to each selection key is possible. This allows utilizing a paging station to
control the lighting, door openers, blinds, etc.; even controlling volume settings is possible through the use
of the n
or p buttons. When shipped, there are no special functions assigned.
3.3 Paging Console Configuration in Setup mode
Configuring paging consoles is preferably performed on the central unit via computer and using the IRIS-
Net software. This represents the most convenient way without any limitation, while a paging terminal itself
offers only limited programming ability. For configuring the paging console via its LC-display the paging
console has to be switched to setup mode as described in following section.
Using the setup mode
In setup mode the configuration of the paging console itself and parts of the PROMATRIX 8000 system
can be editied via the LC-display. Please note that several button functions differ between setup mode and
operation mode. Alternate functions are marked on the right bottom corner of the individual key area.
1. Pressing first the PROGRAM button and then the ON key simultaneously engages a paging station‘s
setup mode.
The first menu item is indicated in the LC-display.
2. Use the paging console buttons for menu navigation and editing parameters.
See following pages for a detailed description of the paging console menu.
3. Pressing the ESC button several times returns to operation mode.
To Next Page
Loading...