Dynacord DPC 8015 - Introduction; System Overview; Scope of Delivery and Warranty

Paging Console
4 Owner‘s Manual
1 Introduction
1.1 System overview
The PROMATRIX 8000 system includes the DPC 8015 paging console and the DPC 8120 paging console
extension. The DPC 8015 employs a gooseneck microphone, 15 programmable function keys and 5
preprogrammed menu keys. Up to 3 alarm keys or key-locked switches can be retrofittted. The DPC 8015
employs a lighted LC-display (122 x 32 pixel).
The paging console includes the following features:
• condenser microphone with pre-amplifier and compressor / limiter circuitry
• freely programmable key-assignment
• easy key-labeling through label-strips
• additional alarm keys or key-locked switches can be optionally retrofitted
• connection of an external PTT-microphone or audio source
• integrated loudspeaker
• high resolution LC-display
• user menu allows direct parameter setting at the paging console
• integrated microphone and line surveillance
• error indication via LED, buzzer and text message at LC-display
• all functions are processor-controlled
• processor surveillance via watchdog function
• configuration data is stored in non-volatile FLASH RAM
The paging console is processor-controlled and extensive monitoring functions are provided. The
watchdog function monitors the processor system. The line surveillance function recognizes any line-
interruption and/or short-circuits in the audio and CAN cabling. The microphone surveillance checks
functionality and recognizes any interruption and/or short-circuit.
The IRIS-Net software allows comfortably configuring the paging consoles. Its graphic, dialogue-oriented
user interface offers effortless assign of key functions, priorities, options, and many other paging console
functions.
1.2 Scope of Delivery and Warranty
DPC 8015
1 Paging console DPC 8015
1 Patch cable (3 metres)
1 Owner‘s manual (this document)
1 Labeling template
1 Warranty card