Paging Console
Owner‘s Manual 9
2.2 Factory Presets
When shipped, the selection keys 1 - n are assigned to the corresponding areas 1 - n offering real
plug‘n‘play; the paging station is ready for operation directly after connection and switching the system
power ON.
The paging stations provide the following factory pre-set functions and characteristics:
ALARM
off No alarm signal launched
lights red Alarm signal has been launched from any source
blinks red Alarm signal has already been stopped, but keeps running until
signal-end
CAUTION:
When connecting several paging consoles to one DPM 8016, setting every single on to
its individual, exclusive address (1...16) is of major importance.
Parameter Setting / Description
CAN address 0 (disconnected)
Priority 5 (priority for messages)
Name DPC 8015
Password Setup menu password protected, Default-Passwort: 2222
Pre-gong signal Off
Buzzer On (acoustic alert signal)
Compressor Off
Optionen
Alarm button Not programmed
Key-lock switch Not programmed
PTT microphone Not programmed
Button
assignment
Selection buttons 1-n Selecting areas 1...n (button 1 = area 1, button 2 = area 2,...)
TALK Call in pre-selected areas, priority 5
ON (
n)
Switching the system ON / OFF, priority 5
PROGRAM (
p)
Assigns a program to pre-selected areas
STOP (ESC) Terminates any locally launched signal (gong, text, alarm)
ALL/CLEAR (DEL) Selecting collective call / deselecting selected areas
Special functions Not programmed
LED Status Description
To Next Page
Loading...