Dynacord DPC 8015 - Lcd Contrast

Paging Console
Owner‘s Manual 17
Date / Time
The connected paging stations allow setting the date and time of the PROMATRIX 8000 system.
Pressing the
 button opens the Date / Time dialog box, which allows selecting day, month, year, hour,
minute or seconds by pressing the n
or p buttons. Edit the parameters be pressing the 0-9 buttons.
Pressing the
 button stores the setting and returns to the user menu.
LCD contrast
Paging consoles with display allow the user to individually adjust LCD contrast and viewing angle. This
allows optimum legibility from the user's location.
Pressing the
 button opens the LCD contrast dialog box where the user can select a contrast setting in
the range of 0 % to 100 % by using the n
or p buttons.
Pressing the
 button stores the setting and returns to the user menu.
LCD brightness
Pressing the  button opens the LCD brightness dialog box where the user can set the display brightness
by using the n
or p buttons.
Pressing the
 button stores the setting and returns to the user menu.
LED test
This menu item allows a test of all paging console LEDs including paging console extension, if available.
Press the
 button for activating the LED test, all LEDs are blinking. Pressing the  button again
deactivates the LED test and returns to the user menu.
Password
Pressing the  button opens the Password dialog box where the user can enter a password using the 0-9
buttons. Press the
 button to commit the password.