18 CA 252/302/402 M252EN6
Always lower the blade to the ground befo-
re leaving or parking the roller.
Make sure that nobody is in the way when
operating the blade.
Lower the blade.
Wipe the nipples clean from grease and dirt, three on
each side of the machine.
Grease each nipple (1) with four strokes of the grease
gun. Ensure that grease penetrates the bearings.
Fig. 21 Strike-off blade
1. Lubricant nipples
1
Strike-off blade – Lubrication
(Optional PD)
EVERY 50 HOURS OF OPERATION (Weekly)
To Next Page
Loading...
