3CA 252/302/402 M252EN6
LUBRICANTS AND SYMBOLS
ENGINE OIL Shell Rimula Super 15W/40 or equivalent
API Service CH-4 (CG-4)
HYDRAULIC FLUID
ambient air temperature
-10°C - +40°C (14°F - 104°F) Shell Tellus TX68 or equivalent
ambient air temperature Shell Tellus TX100 or equivalent
above +40°C (above 104°F)
BIODEGRADABLE Shell Naturelle HF-E46
HYDRAULIC FLUID When it leaves the factory, the machine may be filled
with biologically degradable fluid. The same type of
fluid must be used when changing or topping off.
TRANSMISSION OIL
ambient air temperature Shell Spirax SAE 80W/90, HD API, GL-5
-15°C – +40°C (5°F - 104°F)
ambient air temperature Shell Spirax HD85W/140 or equivalent
above +40°C (above 104°F)
DRUM CARTRIDGE OIL Mobil SHC 629
GREASE SKF LGHB2 (NLGI Class 2) or equivalent for the
articulated joint
Shell Retinax LX2 or equivalent for other grease points
FUEL See the engine manual
COOLANT GlycoShell or equivalent
mixed 50/50 with water Anti-freeze protection down to about -41°C (-106°F).
Other fuel and lubricants are required for operation in extremely high or extremely low
ambient temperature. See the “Special instructions” chapter, or consult Dynapac.
Engine, oil level Air pressure
Engine, oil filter Air filter
Hydraulic fluid tank, level Battery
Hydraulic fluid filter Recycling
Transmission, oil level Fuel filter
Drum, oil level Coolant, level
Oil for lubrication
Always use high-quality lubricants, in the quantities specified. Excess grease or oil can
promote overheating, resulting in premature wear.
To Next Page
Loading...
