Dynapac CA 252 - Acoustic values

7CA 252/302/402 M252EN6
The vibration values are measured in conformance
with the operation cycle described in EU directive
2000/14/EC on EU-equipped machines, on soft
polymer material with vibration switched ON and
operator’s seat in the transport mode.
Whole-body vibration is measured at less than the
action value of 0.5 m/s
2
specified in EU directive
2002/44/EC. (The limit value is 1.15 m/s
2
.)
Hand/arm vibration is measured at less than the
action value of 2.5 m/s
2
specified in the same
directive. (The limit value is 5 m/s
2
.)
TECHNICAL SPECIFICATIONS
CA 252/302/402 108 79 75
The acoustic values are measured in conformance with the operation
cycle described in EU directive 2000/14/EC on EU-equipped
machines, on soft polymer material with vibration switched ON and
operator’s seat in the transport mode.
Acoustic values
Model Guaranteed
acoustic
power level
dB(A) LwA
Acoustic
pressure level,
operator’s ear
(platform)
dB(A) LpA
Acoustic
pressure level,
operator’s ear
(cab) dB(A)
LpA
Vibrations – Drivers seat
(ISO 2631)
Vibration levels may vary when driving on
different courses and with different seat
positions.
Noise level can vary when driving on different
courses and with different seat positions.