Dynapac CC1200 User Manual

Maintenance - 500h
ICC1200-1EN2.pdf2011-03-21
Controls - Lubrication
1
2
Fig. Driver seat
1. Forward/Reverse lever
2. Attachment screws
Lubricate the forward/reverse lever mechanism.
Remove the cover (1) by loosening the screws (2) on
the top, and lubricate the mechanism under the cover
with oil.
Check - Coolant system
Figure. Cooling water container
1. Filler cap
2. Level marking
1
2
Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Also check the freezing point. Change the coolant
every other year.
Also check the freezing point. Change the coolant
every other year.
81

Dynapac CC1200 Specifications

General

Brand	Dynapac
Model	CC1200
Category	Construction Equipment
Language	English