Dynapac CC1200 User Manual

Maintenance - 1000h
ICC1200-1EN2.pdf2011-03-21
Maintenance - 1000h
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Replacing the hydraulic oil filter
1
Fig. Engine compartment
1. Retaining screws
2. Protective cover
1
2
Unscrew the retaining screws (1) on each side of the
roller.
Remove the protective cover (2).
83

Dynapac CC1200 Specifications

General

Brand	Dynapac
Model	CC1200
Category	Construction Equipment
Language	English