Dynapac CP2100 - MONTHLY (Every 250 hours of operation)

Scheduled maintenance and lubrication
72 4812325555EN 2018-02-08
MONTHLY (Every 250 hours of operation)
POSITION
IN THE
FIGURE
ACTION
NOTES
1, 2
Replace the Diesel engine oil and
the oil filter
Refer to the engine
manual instructions.
8
Check and clean the hydraulic
water and Diesel engine water
coolers.
If necessary
18
Check the air conditioning
When equipped (option)
16
Check the batteries
Lubricate the pilot and link bearings
20
Lubricate the lower pivot bearing
21
Lubricate the upper pivot bearing
Replace the air dryer filter
Machine equipped with
AOR
EVERY THREE MONTHS (Every 500 hours of operation)
POSITION
IN THE
FIGURE
ACTION
NOTES
3
Replace the Diesel engine fuel filter
Refer to the engine
manual instructions.
-
Replace the Diesel engine pre-filter
Refer to the engine
manual instructions.
-
Check the bolted joints
7
Check the hydraulic oil tank cover
15
Lubricate the seat bearing
20
Lubricate the lower pivot bearing
21
Lubricate the upper pivot bearing
22
Lubricate the pivot bearing
Replace the air dryer filter
Machine equipped with
AOR