Dynapac CP2100 - Instruments and Controls - Cab

Emergency procedures
32 4812325555EN 2018-02-08
When the high level (High) contamination is achieved, the
equipment will be turned off and the engine red alert will be
triggered. Under these conditions, we recommend stop the
machine immediately and let it perform the regeneration
completely.
Attention! If the accumulation of the DPF reaches maximum
level (Service) equipment is locked and the system is unable to
regenerate itself. Under these conditions, cleaning the filter can
only be performed manually by a skilled technician Cummins.
Attention! Inhibition should only be used in
exceptional cases, when the machine has to
be stopped and there is still a small part of
work to be completed.
Instruments and Controls - Cab
Fig. – High accumulation level
Fig. – Maximum accumulation
level
Fig. – The button disables the
inhibition of regeneration.
.