Dynapac LF90 - 100-Hour Maintenance Schedule; 300-Hour (Annual) Maintenance Schedule; 1000-Hour (Annual) Maintenance Schedule

18
LF90 ILF090EN2
Item in fig. Maintenance see page Comments
Lap intake and exhaust valves See engine manual
Replace pistong rings See engine manual
Adjust valve head clearance for intake
and exhaust valves See engine manual
Every 1000 hours of operation (once every year)
Item in fig. Maintenance see page Comments
Every 300 hours of operation (once every year)
Item in fig. Maintenance see page Comments
1 Change engine oil 20
5 Clean / replace air cleaner elements 19 See engine manual
8 Check V-belt 20
2, 4 Clean/check fuel filter/tank
Every 100 hours of operation
MAINTENANCE – SERVICE POINTS
9 Check eccentric bearing 21
6 Clean / replace oil filter (Diesel) See engine manual
Check fuel injection pump (Diesel) See engine manual
Check fuel injection nozzle (Diesel) See engine manual