20
LH 300/700 ILH300EN4
OPERATION – HATZ 1B30, 1D90V, EL.START
1
O
2
L000459
L000458
Stopping the engine
1. Throttle in stop position.
2. Turn the starter key to position O and remove it.
All indicator lights must go out.
The ignition key must be turned to O, or else
the machine will consume electric power.
Always remove the key when you leave the
machine, and keep it in a safe place. This
will make it difficult for any unauthorized
person to start and drive the machine.
CAUTION
WARNING
To Next Page
Loading...
