Dynapac LH 700 - 100-Hour Maintenance Schedule; 500-Hour & Annual Maintenance; 1000-Hour & Annual Maintenance

24
LH 300/700 ILH300EN4
MAINTENANCE - SERVICE POINTS
Item in fig.1 Maintenance see page Comments
10, 11 Change hydraulic fluid and filter 28
Lap intake and exhaust valves See engine manual.
Replace piston rings See engine manual.
Every 1000 hours of operation / Once a year
Item in fig.1 Maintenance see page Comments
8 Change engine oil 26
9 Change eccentric element oil 27
4 Clean / replace oil filter See engine manual.
2 Clean / replace air cleaner elements See engine manual.
Check fuel injection pump See engine manual.
Check fuel injection nozzle See engine manual.
Adjust valve head clearance for intake
and exhaust valves See engine manual.
Every 500 hours of operation / Once a year
Item in fig.1 Maintenance see page Comments
8 Change engine oil 26
2 Clean / replace air cleaner elements See engine manual.
Every 100 hours of operation
When removing the battery, always dis-
connect the negative cable first. When
fitting the battery, always connect the positi-
ve cable first.
Dispose of the old battery in the approved
environmentally suitable manner – batteries
contain toxic lead.
Do not use a quick-charger when charging the
battery. This may shorten the life of the
battery.
WARNING
CAUTION