28
LH 300/700 ILH300EN4
Changing hydraulic fluid / filter
1. Remove the protecting cover.
2. Open hydraulic reservoir at filter and empty it by
using a suitable pump. Collect the contents in a
receptacle.
3. Replace the hydraulic filter.
Save the oil and dispose of it in an approved
manner. Also dispose of used oil filters
properly.
4. Fill with fresh hydraulic fluid up to the sight glass level:
LH 300: 19,0 lit. (5.0 gal) Shell Tellus TX68
LH 700: 27,0 lit. (7.1 gal) Shell Tellus TX68
5. Replace the filter and all covers.
Lubricating of controls and wires
1. Remove old grease.
2. Lubricate all parts. Apply grease generously.
Recommended lubricant: Shell Alvania EP2.
2
1
MAINTENANCE – EVERY 1000 HOURS OF OPERATION
L000469
1. Hydraulic filter
2. Sight glass
To Next Page
Loading...
