14 Handheld Pulse Oximeter (Reorder No. 36403)
SECTION HEADER2. GENERAL DESCRIPTIONS (Continued)
3.
Low power indicator. When the power is lower than
2.4V, the lamp indicated will be lighted, and the oximeter
will power off automatically when the power is lower than
2.3V.
4. Alarm Indicator: When technical alarm or physiological
alarm occurs, the lamp indicated will turn red.
5. Power button
6. Navigation buttons: you can select and set the different
parameters. These three buttons below are also used as
shortcut buttons:
a) Press the up button, the unit will display the ID number.
b) Press the right or left button, the unit will display the
Error Code.
7. Menu button: You can return to the measurement screen
or switch the main menu item by this button.
8. Reserved function.
9. Beep off/on Indicator: When beep is off, the lamp
indicated by it is on.
10. Alarm light: When there is an alarm, the associated lamp
will be lighted.
11. Pulse bar: The pulse bar is in proportion to the pulse
volume.
NOTE: This manual describes all features and options.
However equipment may not have all accessories.
To Next Page
Loading...
Need help?
General
