dynarex Resp-O2 - Appendix A: Technical Specifications; Display, Alarm, and Measurement Specs

Handheld Pulse Oximeter (Reorder No. 36403) 39
9. MAINTAIN & CLEANING (Continued)
APPENDIX A SPECIFICATIONS
• During measurement of SpO
2
, principle leads to
measuring value difcultly or inaccurate measurement.
• Maintenance seal of Pulse Oximeter is not opened.
9.4.4 User’s Special Request for Warranty
As indicated, according to the relevant electronic
regulation of country, the warranty period is one year,
limited warranty. The sensor’s warranty period is three
months.
Storage and Transportation
Storage: Temperature -20°C~55°C (-4°F~131°F).
Relative Humidity ≤ 90%, no condensation.
Transportation: Transport by airline, train or vessel after
packing according to request.
Display
Data: SpO
2
%, PR
Others: connection status of probe and other alarm information.
Alarm
Alarm: SpO
2
% and pulse rate value, probe off, battery exhausted
Alarm mode: audio alarm, visual alarm and error code
Alarm limits range: 70%-100%
Default limits: High 99%: low 90%