20 Handheld Pulse Oximeter (Reorder No. 36403)
SECTION HEADER3. GETTING STARTED (Continued)
3.4 Starting or Shutting Off the Oximeter
To start the Pulse Oximeter
1. Press and hold the Power button for 3 seconds. The LED
and alarm lamp ashes, and then goes out. The system
gives a beep and displays the startup screen. The startup
screen displays the version number of software.
2. The startup screen disappears and normal screen
appears.
To shut off the Pulse Oximeter
1. Conrm that the patient measurement is nished.
2. Disconnect the SpO
2
extension cable from the Pulse
Oximeter.
3. Press and hold the Power button for 4 seconds.
WARNING
Do not use the Pulse Oximeter if you suspect it is not
working properly, or if it is mechanically damaged. Contact
your distributor immediately.
To Next Page
Loading...
