To Next Page
H
hmorganAug 7, 2025
What to do if my dynarex Respiratory Product motor overheats?
- MMariah MitchellAug 7, 2025
If the motor overheats, switch the device off and let the motor cool down for about 5 minutes. Also, inspect the fuses.
What to do if my dynarex Respiratory Product motor overheats?
If the motor overheats, switch the device off and let the motor cool down for about 5 minutes. Also, inspect the fuses.
Why is there no vacuum when the motor is running on my dynarex Resp-O2 Respiratory Product?
If the motor is running but there's no vacuum, make sure the tubing is securely connected and check for any leaks or kinks in the tubing. Also, verify that the float shut-off hasn't been activated and inspect the bottle for any leaks or cracks.
How to fix low vacuum on dynarex Respiratory Product?
To address low vacuum, try using the vacuum adjustment knob to increase the vacuum pressure level. Also, check the system for any leaks.
General| Product Type | Oxygen Mask |
|---|---|
| Type | Non-Rebreather |
| Mask Type | Adult |
| Sterility | Non-Sterile |
| Single Use | Yes |
| Color | Clear |
