Dynaudio AIR 20 - Setup Menu ► Setup Selection

AIR Menu structure and parameters
Dynaudio Professional AIR reference manual – 2014-09-28 22
Setup menu ►
Setup selection
Use the Setup selection menu to specify how your AIR
system is set up. All standard setups are shown and
explained in “AIR setups” on page 29.
Selecting your AIR system setup
►
From the home screen, press the ENTER key.
►
Press the DOWN key until “Setup menu” is dis-
played.
►
Press the ENTER key.
“Setup” is displayed.
►
Press the ENTER key.
“*Select setup” is displayed.
►
Press the UP and DOWN keys to select the correct
setup.
►
Press the ENTER key to conrm your selection.
►
Press the EXIT key repeatedly to return to the
home screen.
Setup name Remarks
Empty No selection
Custom For custom congurations.
Stereo analog Two monitor stereo setup with analog* inputs selected
Stereo Digital Two monitor stereo setup with digital inputs selected
5.1 Analog 5.1 setup with analog* inputs selected
5.1 Digital 5.1 setup with digital inputs selected
6.1 Analog 5.1 Setup + Center surround on a separate channel gives the 6.1 setup.
6.1 Digital 5.1 Setup + Center surround on a separate channel gives the 6.1 setup.
5.3 Analog Analog setup with 5 monitors and 3 subs
5.3 Digital Digital setup with 5 monitors and 3 subs
5.1 Digital/6 Master 5.1 Setup using one Master unit with optional Digital I/O card installed, 4 slave monitors (or Masters set as slave) and 1 sub
* Analog inputs are only available with an optional analog card installed.