AIR Control software
Dynaudio Professional AIR reference manual – 2014-09-28 79
LFE Low Pass
Use the LFE Low Pass parameter to activate the Low-
pass lter for the LFE channel on the selected subwoof-
er. See “LFE Low Pass Filter (subwoofer parameter)”
on page 61.
Locking parameters for individual monitors
The Lock page in the Global section of the AIR Con-
trol software allows you to lock certain features for all
monitors in your AIR system – see “Lock page” on page
75. In addition, you can lock parameters for individu-
al monitors on the Monitor Setup page.
To lock a parameter for a monitor, so that it cannot be
changed using the System Controller’s navigation keys,
►
select this monitor’s tab in the AIR Control soft-
ware,
►
go to the Setup page and
►
click the Lock button to the left of the respective
parameter.
Please note that even when a parameter has been
locked, the user will still be able to navigate to it and
see its current setting on an AIR master monitor. How-
ever, he won’t be able to change it. Instead, the display
will show the message “Locked” when an arrow key is
pressed.
To Next Page
Loading...
