Dynaudio BM14S - Technical Specifications

9. Technical Specifications
14 Dynaudio Acoustics BM14S
9. Technical Specifications
Parameter Data
System Active subwoofer
Bass principle Closed
Frequency response 18 Hz to 250 Hz (+/-3 dB)
Inputs
• LFE/Slave
• SAT/SUB
XLR
right/left full bandwidth, XLR
Input impedance
• + branch
• – branch
20 kOhm
10 kOhm
Sensitivity 75 mV
RMS
to 5 V
RMS
, adjustable
Max. input voltage 10 V
RMS
Outputs
• Slave
• SAT/SUB
XLR
right/left, Highpass filtered, XLR
Output impedance 100 Ohm (each branch)
XLR Pinout 1 = 0 / 2 = + / 3 = –
Mode selector LFE, Slave (Phase and volume controls are bypassed in slave mode)
Phase adjustment 0°, 180°
Highpass Flat, 60 Hz, 80 Hz
Lowpass 50 Hz to 150 Hz
Power modes On, Auto
Amplifier power 300 W, 4 Ohm
Power consumption
• Standby
• max.
< 5 W
500 W
Woofer
• Cone
• Coil
300 mm/12″, long throw, molded MSP (Magnesium Silicate Polymer) cone
75 mm/3″ voice coil
Dimensions, external
(height x width x depth)
Cabinet volume
Weight
36,8 cm x 35,0 cm x 42,0 cm / 14.5" x 13.8" x 16.5"
(incl. feet and grille)
31 liters
21 kg
Mains 120 V, 50/60 Hz, Fuse T4 A
220-240 V, 50/60 Hz, Fuse T2 A