Why is my Dynex DX-24L150A11 LCD TV remote control not working?
If your Dynex LCD TV remote control isn't working, check if the power cord is plugged in. Also, make sure there are no obstructions between the remote and the sensor on the TV's front. Verify the batteries are correctly installed or replace them.
What to do if my Dynex DX-24L150A11 LCD TV has no picture and sound?
If your Dynex LCD TV has no picture and no sound, ensure the power cord is plugged in, press the POWER button on the TV or remote, select the correct video input source, and try another channel in case the station is experiencing problems.
How to fix a Dynex DX-24L150A11 with good picture but no sound?
If your Dynex LCD TV has a good picture but no sound, first ensure that the sound is not muted. Then, make sure the sound mode is set to Stereo or Mono.
Why is the picture on my Dynex LCD TV dark, poor, or missing, but the sound is good?
If your Dynex LCD TV has a dark, poor, or missing picture but the sound is good, try adjusting the brightness. Also, make sure the correct picture mode is selected. Finally, ensure the antenna or cable TV is securely connected.
What to do if my Dynex DX-24L150A11 LCD TV only shows snow?
If your Dynex LCD TV only displays snow (noise), try switching to another channel as the station might be experiencing issues. Also, ensure that the antenna or cable TV is correctly and securely connected. Check the signal strength of the channel as well.
How to eliminate audio noise on Dynex LCD TV?
If you are experiencing audio noise with your Dynex LCD TV, ensure there is no interference from infrared equipment like cordless phones or headphones. Move any infrared equipment away from the TV to eliminate the noise.
Why does my Dynex DX-24L150A11 LCD TV have dotted lines or stripes on the screen?
If your Dynex LCD TV displays dotted lines or stripes, try adjusting the antenna. Also, move the TV away from potential noise sources such as cars, neon signs, or hair dryers.
Why are some channels not displaying on my Dynex DX-24L150A11?
If one or more channels are not displaying on your Dynex LCD TV, ensure that the channels are not blocked or hidden. The channel may also have been deleted from the channel list.
How to resolve double images on Dynex DX-24L150A11 LCD TV?
To resolve double images on your Dynex LCD TV, use a highly directional outdoor antenna or cable TV.
Why can't I access some settings on my Dynex DX-24L150A11?
If a setting is grayed out on your Dynex LCD TV, it is not available in the current video input mode.
General| Screen Size | 24 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Contrast Ratio | 1000:1 |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Response Time | 5 ms |
| Viewing Angle | 170° (H) / 160° (V) |
| Speakers | 2 x 3W |
| Inputs | HDMI, Component, Composite, RF |
To Next Page
