Why does my Dynex LCD TV picture not fill the screen?
If your Dynex LCD TV picture doesn't fill the screen and you see black bars, it might be due to the aspect ratio. Many digital TV programs and movies are now shown in widescreen (16:9). To resolve this, change the aspect ratio setting on your TV.
What to do if my Dynex DX-24L230A12 LCD TV has no power?
If your Dynex LCD TV has no power: - Make sure that the power cord is correctly connected to your TV and a power outlet. - Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. - Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
Why is there no picture and sound on my Dynex DX-24L230A12?
If your Dynex LCD TV has no picture and no sound, try the following: - Press the power button on the TV or the remote control. - Ensure the power cord is plugged in. - Check that the video cables are securely connected to the back of your TV. - Select the correct video input source. - Adjust the contrast and brightness. - Try another channel to rule out station problems. - Verify that the incoming signal is compatible. - Ensure the antenna or cable TV is connected correctly and securely. - Check the closed caption settings, as some TEXT modes can block the screen.
What to do if my Dynex LCD TV has good picture, but no sound?
If your Dynex LCD TV has a good picture but no sound, consider the following: - Increase the volume. - Ensure the sound is not muted. - Select the correct audio mode. - Check that the audio cables are correctly and securely connected to the back of your TV. - Ensure the antenna or cable TV is connected correctly and securely. - If you are using an antenna, the digital channel signal may be low. - The audio cable(s) you are using may be bad; try a new set.
What to do if my Dynex DX-24L230A12 LCD TV displays a 'no signal' error message?
If your Dynex LCD TV displays a 'no signal' error message: - Press the INPUT button and select the correct input for your device or service. - If using a cable or satellite box, use its remote to change channels.
Why one or more channels do not display on Dynex LCD TV?
If one or more channels do not display on your Dynex LCD TV: - Make sure that the channels are not blocked. - Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. - If you are using a cable or satellite box, use the remote that came with that box to change channels. - Make sure you have the correct input selected to view channels from the cable or satellite box. - If you are using an antenna, the digital channel signal may be low.
What causes after images on Dynex LCD TV?
To prevent after images on your Dynex LCD TV, do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen.
What to do after auto channel search when there are no channels on Dynex DX-24L230A12 LCD TV?
After running Auto Channel Search on your Dynex LCD TV, if there are no channels: - Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. - Make sure the antenna or cable/satellite TV is connected securely to your TV. - Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
How to fix double images on Dynex LCD TV?
To resolve double images on your Dynex LCD TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
What to do if my Dynex LCD TV only displays snow (noise) on the screen?
If your Dynex LCD TV only displays snow (noise) on the screen: - Try another channel. - Ensure the antenna or cable TV is connected correctly and securely. - If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
General| Screen Size | 24 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Viewing Angle | 170° (H) / 160° (V) |
| Speakers | 2 x 3W |
| Inputs | HDMI, VGA, Component, Composite, RF |
| Dimensions (W x H x D) | 7.1 inches (180 mm) |
To Next Page
