What to do if the control buttons on my Dynex LCD TV don't work?
If the control buttons on your Dynex LCD TV do not work, ensure the 'Button Lock' option is set to 'No'. If that doesn't work, unplug the power cord, wait a few seconds, then plug it back in and turn on your TV.
Why is my Dynex DX-37L200A12 LCD TV making audio noise?
If you are experiencing audio noise with your Dynex LCD TV, other devices may be interfering with it. Try turning off one device at a time to determine which device is causing the interference.
Why is my Dynex LCD TV showing double images?
If your Dynex LCD TV is showing double images, use a highly directional outdoor antenna, cable TV, or satellite TV.
Why is there no output from one of the speakers on my Dynex LCD TV?
If there is no output from one of the speakers on your Dynex LCD TV, adjust the audio balance. Also, make sure that the audio cables are connected correctly and securely to the back of your TV.
Why does my Dynex DX-37L200A12 LCD TV keep turning off?
If your Dynex LCD TV keeps turning off, make sure that the sleep timer is not turned on.
General| Screen Size | 37 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| Speakers | 2 x 10W |
| Refresh Rate | 60Hz |
| Brightness | 450 cd/m² |
| Response Time | 8 ms |
| Power Consumption | 150W |
| Viewing Angle | 178° |
| Inputs | HDMI, Component, Composite |
To Next Page