Dynisco LMI5000 Series User Manual

From lab to production,
providing a window into the process
-21-
Buttons –A button is an active touch area that will perform a specific action
on the release of the button. There are three states to a button: released, press
ed,
and disabled along with the option of a press and hold which will repeat the
desired action as long as the button is pressed
Instrument Operation/Buttons
P/N: M0726(3) | Rev: 012020 | ECO: 51182
www.dynisco.com

Dynisco LMI5000 Series Specifications

General

Brand	Dynisco
Model	LMI5000 Series
Category	Laboratory Equipment
Language	English