Need help?Do you have a question about the Dynisco LMI5000 Series and is the answer not in the manual?
General| Model | LMI5000 Series |
|---|---|
| Category | Laboratory Equipment |
| Type | Melt Flow Indexer |
| Standards | ASTM D1238, ISO 1133 |
| Temperature Accuracy | ±0.1°C |
| Cylinder Bore Diameter | 9.55 mm |
| Die Diameter | 2.095 mm |
| Die Length | 8.000 mm |
| Load Range | 0.325 kg to 21.6 kg |
| Accuracy | ±0.5% of reading |
| Cylinder Length | 162 mm |
| Piston Diameter | 9.474 mm |
| Display | LCD |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Temperature Range | 50°C to 400°C (122°F to 752°F) |
Explains hazard symbols and their meanings for safe operation.
Details electrical risks and safe handling of mercury thermometers.
Steps for unpacking, placement, and leveling the instrument.
Procedures for leveling the melt indexer for stability.
Formulas for Method A, B, A/B, and PET IV.
Guidelines for determining material quantity and charging the barrel.
Setting up and modifying test parameters and programs.
Steps to set up, load, run, and clean the instrument.
Steps to resolve common issues and run checks.
To Next Page
