Dynojet Power Commander III Installation Instructions

8. Unplug the throttle body
connector (Fig. G). This
connector is located under-
neath the throttle bodies.
9. Plug the connectors that are
closest to the PCIII unit in-
line of the stock throttle
body connector (Fig. H).
10. Unplug the Throttle Position
Sensor connector. This
connector is located in front
of the throttle bodies on top
of the valve cover and is
the grey colored connector
(Fig. I).
Fig. GFig. H
Fig. I
2004 Kawasaki ZX6RR - PCIII USB - 4i213-411 www.powercommander.com
Connector
Stock
PCIII
Unplug This Connector

Dynojet Power Commander III Specifications

General

Brand	Dynojet
Model	Power Commander III
Category	Motorcycle Accessories
Language	English