Dyon SMART 43 VX - Page 20

EN
DYON SMART 43 VX
20
Inserting the battery into the remote control
Notes on batteries
Alkaline batteries are recommended.
Replace the batteries when the following signs are
present:
Signal is hesitant or erratic.
Operation is no longer possible.
Remove the batteries if the remote control will not be
used for a long period of time. Be careful not to heat,
disassemble, deform or modify the batteries.
Remove the battery cover.
Insert two AAA 1.5V batteries.
Make sure that the polarity
(+ or -) is correct. The polarity is
indicated.
Put the battery cover back in
place.