Dyon SMART 43 VX - Troubleshooting; Fehlermeldungen

EN
DYON SMART 43 VX
49
17 Troubleshooting
If you have any problems with this unit or its installation, please
look again carefully at the relevant section in this instruction
manual and read details in the table below.
17.1 Fehlermeldungen
Problem
Possible cause
Proposed solution
No picture
Mains plug not in the
socket.
Insert the mains
plug into the
socket.
Unit is not switched
on.
Switch on the unit.
„No signal"
display
Antenna cable is not
connected.
Connect the
antenna cable.
Incorrect setting.
Set the parameters
correctly.
No sound
Audio cable not
connected or not
connected correctly.
Schließen Sie das
Audiokabel korrekt
an.
Sound is muted.
Stellen Sie die
Lautstärke ein.
Wrong soundtrack
chosen.
Wählen Sie einen
anderen
Soundtrack.
Sound, but no
picture
AV cable not
connected or not
connected correctly.
Schließen Sie das
AV-Kabel korrekt
an.
This is a radio
channel.
Drücken Sie
TV/RADIO zum
Umschalten in den
TV-Modus.