CLASS 2000 METER
27 62-0389-03
STEP 6: Press the DOWN button to access the TIME screen.
STEP 7: Press ENTER to cycle between the hour, minutes, and day of week selection
Use the UP and DOWN buttons to change the selection.
STEP 8:When the changes are completed press the ENTER button to save the
changes.
STEP 9: Press ENTER to enter the DEMAND INTERVAL screen.
STEP 10: Press ENTER again to access the interval selection screen. Use the UP and
DOWN buttons to select the appropriate interval time. (default is 15 min.)
STEP 11:When the appropriate demand interval has been chosen, press ENTER to
save the changes.
To Next Page
Loading...
